Polypropylene random (PP-R) pipes and injection-molded fittings for residential and commercial plumbing. The pipe and fittings are joined by socket heat fusion, forming a permanent, leak-free joint with no glue or rubber rings.
Supply range covers full sizes from dn20 to dn110 with matching elbows, tees, couplings, crossings, threaded adapters and valves.
| Material | Polypropylene random copolymer (PP-R), 100% virgin resin |
|---|---|
| Applicable standard | GB/T 18742.1 / 18742.2 (equivalent to DIN 8077 / 8078) |
| Nominal sizes | dn20 / 25 / 32 / 40 / 50 / 63 / 75 / 90 / 110 mm |
| Pressure class | PN1.25 / PN1.6 / PN2.0 / PN2.5 (wall series S5–S2.5) |
| Media temperature | Cold water ≤ 25 °C; hot water ≤ 70 °C long-term; short-term peaks up to 95 °C |
| Joint method | Socket heat fusion (fusion sleeve depth per GB/T 18742.3); threaded inserts for transitions |
| Colors | Green / white / grey (custom colors on request) |
| Design service life | 50 years under standard use classes per GB/T 18742 |
| Packaging | Pipes in coils or straight lengths × 4 m; fittings in cartons; OEM packaging available |
Pipe and fitting melt into one body — no glue, no gaskets, no joint creep over time.
Same material for both lines; PN2.0/PN2.5 walls for hot water risers.
Smooth PP-R bore does not rust or pit; flow capacity stays stable over the years.
Elbows, tees, couplings, reducers, crossings, threaded adapters — one supplier, one standard.
Tell us the sizes, pressure class and quantity — quotation within 24 hours on working days.
Inquire About This Product