PEX-A is produced by peroxide cross-linking, the method that achieves the highest and most uniform cross-link degree among PEX types. The result is a pipe with outstanding flexibility — installers can bend it around corners by hand, and small kinks recover with a heat gun.
Used for radiant floor heating loops, radiator connections and potable water plumbing, with crimp / compression / push-fit fitting options. An EVOH oxygen-barrier version is available for closed heating loops per DIN 4726.
| Material | Peroxide cross-linked polyethylene (PEX-A), high & uniform cross-link degree |
|---|---|
| Applicable standard | GB/T 18992 series (radiant heating & plumbing); ASTM F876 on request |
| Nominal sizes | 16 / 20 / 25 / 32 mm (wall per wall series below) |
| Wall series | S6.3 / S5 / S4 / S3.2 — corresponding to PN1.0 / 1.25 / 1.6 / 2.0 MPa at design temperature |
| Media temperature | Use classes per GB/T 18992 (Typ. ≤ 70 °C continuous, short-term peaks to 95 °C) |
| Oxygen barrier (option) | EVOH outer layer per DIN 4726 — for closed loops with steel components |
| Fittings | Crimp (ASTM F1807), compression, push-fit — supplied as a matched system |
| Colors | Red / blue / white (oxygen-barrier version with EVOH layer) |
| Coil lengths | 50 m / 100 m / 200 m / 300 m / 600 m |
| Design service life | 50 years under standard use conditions |
Product photo shown is a placeholder illustration — request the current catalogue photo or a sample coil before publication-grade marketing use.
Highest flexibility among PEX types — fewer fittings, faster loop routing around corners.
Accidental kinks recover with local heat — fewer scrapped coils on site.
EVOH version protects boilers and circulators in closed hydronic loops (DIN 4726).
Works with crimp, compression and push-fit systems for your local installation habits.
Plain or oxygen-barrier, with matched fittings — ask for the system quotation.
Inquire About This Product