HDPE (PE100) is the modern choice for buried water mains: heat-fused joints create a leak-free pipeline, the material flexes to handle ground movement, and long coils mean fewer joints on rural lines. Black body with blue identification stripe, hygienic for drinking water.
| Material | PE100 polyethylene (MRS 10.0 MPa), 100% virgin resin |
|---|---|
| Applicable standard | GB/T 13663.2 (polyethylene piping systems for water supply) |
| Nominal sizes | dn63 – dn1200 mm (small dn20–dn63 on request) |
| Pressure class | SDR26 PN0.6 / SDR21 PN0.8 / SDR17 PN1.0 / SDR13.6 PN1.25 / SDR11 PN1.6 MPa |
| Media temperature | 0 – 40 °C (cold potable water) |
| Joint method | Butt fusion / electrofusion; flange adapters for valve connections |
| Identification | Black body with co-extruded blue stripes (water supply) |
| Lengths | dn63 and below: coils 50–200 m; above: straight lengths 6 / 9 / 12 m |
| Design service life | 50 years at 20 °C under rated pressure |
Butt-fused joints are as strong as the pipe wall itself — no rubber seals to age, near-zero water loss.
Flexibility absorbs soil settlement and seismic shift; ideal for earthquake-prone and mining regions.
Small diameters come in 100 m+ coils — fast installation along rural roads with minimal fittings.
Suitable for pipe-bursting and HDD rehabilitation where open-cut is impossible.
Tell us your diameter, pressure class and total meters — quotation within 24 hours.
Inquire About This Product