PE-RT Type II pipe for hydronic radiant floor heating. The hydrophobic inner wall has a water contact angle above 104° (ordinary PE-RT is below 85°), so scale particles struggle to attach — the lotus-effect keeps loops clean and heating output stable without frequent flushing.
For closed-loop systems with steel components (boilers, circulators, radiators), choose the EVOH oxygen-barrier version — its outer layer meets the DIN 4726 oxygen-diffusion requirement, protecting metal parts from oxygen corrosion.
| Material | PE-RT Type II resin (higher temperature resistance than Type I) |
|---|---|
| Applicable standard | GB/T 28799.2 (radiant heating); oxygen barrier per DIN 4726 (EVOH version) |
| Nominal sizes | 16 × 2.0 mm / 20 × 2.0 mm / 25 × 2.5 mm |
| Wall series | SDR 7.4 / SDR 9 |
| Working pressure | Up to 1.0 MPa at design temperature (per wall series) |
| Media temperature | ≤ 70 °C continuous; short-term peaks to 95 °C |
| Anti-scale inner wall | Hydrophobic surface, water contact angle > 104° (ordinary PE-RT < 85°) — self-cleaning lotus effect |
| Oxygen barrier (option) | EVOH outer layer per DIN 4726 — for closed loops with steel boilers / circulators / radiators |
| Design service life | 50 years under standard use conditions |
| Coil lengths | 100 m / 200 m / 300 m / 600 m per coil |
| Colors | Red / white (oxygen-barrier version with EVOH layer) |
Hydrophobic inner wall reduces scale build-up, lowering flushing frequency over the system life.
EVOH layer stops oxygen diffusion into the loop — boilers and circulators last longer.
Type II resin bends tightly on site and recovers from accidental kinks with heat.
Coils up to 600 m let you lay a full apartment with zero mid-floor joints.
Plain or oxygen-barrier version — send loop lengths and total quantity for a 24-hour quotation.
Inquire About This Product